Spread the love

If you’re also one of those people who started their businesses the small way, you’ve probably seen yourself gradually increase the assets and facilities of your workplace as the number of the employees under you slowly increased. There might have been certain things you had to entirely replace, and even some that you did not need to change at all. Well, your Wi-Fi network should probably fall into the former camp. That is, if you want to avoid some serious problems in connectivity.
At the start, you might even have relied on a normal consumer-grade router. Of course, there is no problem with that – at the start, it is better if you try to be cost-effective with just about everything. However, by the time you’re past your initial crises, it is time you start to consider switching to business-grade models and the like. Consumer-grade routers are very susceptible to foreign interference, and they can’t really meet the demands a business has of its network. Furthermore, you’ll also have to consider installing your first APs (Access Points). Employees nowadays don’t carry a single Wi-Fi device – they probably have at least three devices (the PC, the smartphone and the tab). A router can only handle so many Wi-Fi devices at once – this is where APs come in handy. An AP is basically what its name says – an alternative point through which a device can connect to the network. This will prevent the overburdening of your router. Now this is where the problems start – there are few needs you might not consider when using APs:
• Buy business APs – again, don’t rely on consumer-grade models. They are obviously not built for business use (as if the name did not make that clear) – they lack many of the features business models have, such as security and load management. For example, you can buy Aruba, Cisco, or Ruckus access points, which are all high-end business models.
Ruckus access points have been especially praised for their BeamFlex technology, which can cut down your energy expenses.

• Placement – a common mistake when installing APs is not understanding where exactly they need to be installed. For this end, you can also rely on professionals if you’re really unsure. Basically, APs need to be placed so that they don’t interfere with each other, and also away from obstacles which can obstruct the signals. The best positioning is high up on the walls of every corner – but depending on the number of employees, this might not be enough. There are also brands which are geared towards the deployment of many APs in one place – so you might want to check them out too.
• The 5GHz band – if you’ve bought business APs, chances are you’ll probably have APs capable of simultaneous dual band – that is, the AP offers both 2.4GHz and 5GHz bands. Normally, APs are set to function at 2.4GHz – this is the band that all devices can work on. However, most PCs can also work in the 5GHz band, so make sure to turn that on. It’ll reduce the traffic by offloading the PCs into the 5GHz band, leaving other devices to use the freed up space in the 2.4GHz band.
There are of course many more common mistakes, such as not using WPA2 key, and still relying on WEP keys for encryption (which if you’re using, you should stop immediately and switch over to better encryption). Fixing these common mistakes can have a great effect on the speed and efficiency of your Wi-Fi network, so be sure to employ them – especially if you’re suffering from lagging connections! Click this link http://expeditesolutions.com.sg/our-services/smart/ for more information about inncom integrated room automation system.